包投logo
Inquiry
<
>
ASTM 310S Stainless Steel Coil
As an important material in aerospace and chemical industries, 310S heat-resistant steel is widely used in high temperature environments. High temperature oxidation is the most common and most important form of corrosion damage at high temperature. Therefore, the research and development of new materials with high temperature oxidation resistance has far-reaching significance for my country’s aviation industry, chemical industry and national defense. Austenitic heat-resistant stainless steel 310S (0Cr25N i20) is a high chromium nickel austenitic stainless steel
0086-15311659629
Alice@bj-export.com
◉ Product Parameters
◉ Factory Display
◉ FAQ
◉ Product Recommendation

Product Parameters


310S Stainless steel coil manufacturer

310S (old grade 0Cr25Ni20/ new grade 06Cr25Ni20) is an austenitic chromium-nickel stainless steel with good oxidation resistance and corrosion resistance, due to the higher percentage of chromium and nickel, 310S has much better creep strength, can continue to work at high temperatures, has good high temperature resistance.

310S Stainless steel coil Price in China ,Manufacturer of 310S Stainless Steel coil

310S stainless steel is austenitic chromium-nickel stainless steel, has good oxidation resistance, corrosion resistance, high temperature resistance, because of the higher percentage of chromium and nickel, making it has much better creep strength, can continue to work at high temperature, has good high temperature resistance.
Because of the high content of nickel (Ni), chromium (Cr), has good oxidation resistance, corrosion resistance, acid and alkali resistance, high temperature resistance, high temperature resistant steel pipe is dedicated to the manufacture of electric furnace tube and other occasions, austenitic stainless steel increases the content of carbon, due to its solid solution strengthening effect so that the strength is improved,
The austenitic stainless steel has high strength and creep strength at high temperature due to its face-centered cubic structure, which is based on chromium and nickel.
Melting point 1470℃, 800℃ began to soften, allowable stress continued to reduce.

Improve the common carbon tool steels brittle nature, and to extend the life of tools.
Vacuum degassing refining steel, stable quality.
Good hardenability, oil cold hardening (quenching and deformation less) good toughness and wear resistance, durable tools.

Standard Specification Of 310S coil

Thickness0.1mm-12mm
Width1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
LengthSince the custom
Surface2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
FinishHot rolled coil (HR), Cold rolled coil (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form Coils, Foils, Rolls, Plain coil, Shim coil, Perforated coil, Chequered coil, Strip, Flats,
Blank (Circle), Ring (Flange) etc.

310S stainless steel composition content.

GradeCMnSiPSCrMoNiN
310SMin.
Max.		≤0.08≤2.0≤1.5≤0.035≤0.0324.00-26.00/19.00-22.00

Ob (MPa) 520 or higher, o0.2 (MPa) 205 or higher, the delta 5 (%) of 40 or higher, Ψ (%) of 50 or more, HB 187 or less can withstand temperatures up to 1150 ℃.
Melting point at 1398 ℃ ~ 1454 ℃
Tempering: 180 ~ 200
Annealing condition, ≤207HB, indentation diameter ≥4.20mm
Quenching, p 62 HRC

310S Characteristic machining technology

1D — The surface has discontinuous granular shape, also known as fog surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2D – A slightly silvery white colour.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2B — Silver white with better gloss and flatness than a 2D surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling.
Ba – Excellent surface gloss, high reflectivity, like a mirror surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling.
No.3 — Good gloss, coarse grain surface.
Processing technology: polishing and tempering rolling for 2D or 2B with 100~120 abrasive materials (JIS R6002).
No.4 — Good gloss, fine lines on the surface.
Processing process: polishing and tempering rolling for 2D or 2B with 150~180 abrasive materials (JIS R6002).
HL — Silver grey with hair streaks.
Processing technology: 2D products or 2B products with appropriate granularity of abrasive materials for polishing the surface is a continuous abrasive grain.
MIRRO — Specular.
Processing technology: 2D products or 2B products with appropriate granularity of the grinding material grinding and polishing to the mirror effect.

Chemical Properties of Frequently-used Stainless Steel Material Grade

UNSASTMENJISC%Mn%P%S%Si%Cr%Ni%Mo%
S201002011.4372SUS201≤0.155.5-7.5≤0.06≤0.03≤1.0016.0-18.03.5-5.5-
S202002021.4373SUS202≤0.157.5-10.0≤0.06≤0.03≤1.0017.0-19.04.0-6.0-
S301003011.4319SUS301≤0.15≤2.00≤0.045≤0.03≤1.0016.0-18.06.0-8.0-
S304003041.4301SUS304≤0.08≤2.00≤0.045≤0.03≤0.7518.0-20.08.0-10.5-
S30403304L1.4306SUS304L≤0.03≤2.00≤0.045≤0.03≤0.7518.0-20.08.0-12.0-
S30908309S1.4833SUS309S≤0.08≤2.00≤0.045≤0.03≤0.7522.0-24.012.0-15.0-
S31008310S1.4845SUS310S≤0.08≤2.00≤0.045≤0.03≤1.5024.0-26.019.0-22.0-
S316003161.4401SUS316≤0.08≤2.00≤0.045≤0.03≤0.7516.0-18.010.0-14.02.0-3.0
S31603316L1.4404SUS316L≤0.03≤2.00≤0.045≤0.03≤0.7516.0-18.010.0-14.02.0-3.0
S31703317L1.4438SUS317L≤0.03≤2.00≤0.045≤0.03≤0.7518.0-20.011.0-15.03.0-4.0
S321003211.4541SUS321≤0.08≤2.00≤0.045≤0.03≤0.7517.0-19.09.0-12.0-
S347003471.4550SUS347≤0.08≤2.00≤0.045≤0.03≤0.7517.0-19.09.0-13.0-
S405004051.4002SUS405≤0.08≤1.00≤0.04≤0.03≤1.0011.5-14.5≤0.60-
S409004091.4512SUS409≤0.08≤1.00≤0.045≤0.03≤1.0010.5-11.75≤0.50-
S430004301.4016SUS430≤0.12≤1.00≤0.040≤0.03≤0.7516.0-18.0≤0.60-
S434004341.4113SUS434≤0.12≤1.00≤0.040≤0.03≤1.0016.0-18.0--
S444004441.4521SUS444L≤0.025≤1.00≤0.045≤0.03≤1.0017.5-19.5≤1.00-
S40300403-SUS403≤0.155.5-7.5≤0.04≤0.03≤0.5011.5-13.0≤0.60-
S4100004101.40006SUS410≤0.15≤1.00≤0.035≤0.03≤1.0011.5-13.5≤0.60≤1.00
S420004201.4021SUS420J10.16~0.25≤1.00≤0.04≤0.03≤1.0012.0-14.0≤0.75≤1.00
S440A440A1.4028SUS440A0.60~0.75≤1.00≤0.04≤0.03≤1.0016.0-18.0-≤0.75
S32750SAD25071.4410
≤0.03≤1.2≤0.035≤0.02≤0.8024.0-26.06.0-8.03.0-5.0
S31803SAF22051.4462
≤0.03≤2.0≤0.03≤0.02≤1.0021.0-23.04.0-6.52.5-3.5
N08904904L1.4539
≤0.0.3≤2.0≤0.035≤0.03≤1.0018.0-20.023.0-25.03.0-4.0
Stainless steel coil inventory packaging


20230307102549723.jpg20230307102548977.jpg
20230307102547394.jpg20230307102547899.jpg



Factory Display

  • 645f88ceb28016b71deb44d0eca6ae91346ff4f633046-YV9trp.jpg
  • 4ba06389467ca90624596b987abe434be8635cba188343-TdLEpR 拷贝.jpg
  • 8.jpg
  • 1.jpg
  • 12.jpg
  • 工厂 (2).png
  • 工厂 (2).jpeg
  • 工厂车间 (1).jpeg
  • 工厂车间 (12).jpeg

FAQ

Q: Are you trading company or manufacturer ?

A: We are professional manufacturer with 20 years' experience, and our company also is a very professional a trade company for steel products.We can also provide a wide range of steel products.

Q: Will you delivery the goods on time?

A: Yes,we promise to deliver on time,indemnity clause in contract terms will work if we couldn't.

Q: Do you provide samples ? Is it free or extra ?

A: The samples are free,you just need to pay the courier freight.

Q: How could you guarantee your products?

A: Products are manufactured by certified workshops, inspected by professional inspector.

Q: Do you accept the third party inspection?

A: Yes, absolutely we accept.

Q: How do we trust your company?

A: We specialist in steel business for many years, authenticated by SGS,welcome to visit our factory.

Q: What's your advantages?

A: Our own production lines make the good prices and high quality possible and seasoned workers serve you 7*24 hours.

Q: Can you produce the products according to my own drawings?

A:Yes,we can produce the products according to your drawings that will be most satisfy you.

Q: What is your Payment?

A: 100% T/T advance , Western Union (For Small Order)
B: 30% T/T and balance 70% before the shipment
C: 100% Irrevocable LC at sight (For Big Order)

Q: How long is the Delivery time?

A: 7~20 working days after confirming the payment.
If the order is urgently, we will push our workshop finish in advance.

Product Recommendation