包投logo
Inquiry
<
>
2205 Stainless Steel Coil
SA-240 Duplex 2205 cold rolled sheet High strength, difficult to bend. It is heat treated to 1020 – 1100 degrees Celsius, and thus cooled to harden it even more. Werkstoff equivalent Din 1.4462 cold rolled sheet has a density of 7.8 g/cm3 and a modulus of elasticity of 200 GPa and a specific heat capacity of 450 J/kg.K in the annealed condition. Equivalent to standard S31803. It is used in marine and high chlorine environments. Alloy 2205 Checkerboard
Resists chloride stress cracking at temperatures up to 150 degrees Celsius with a minimum yield strength of 450 MPa. It has austenite and ferrite with a composition of 50-50%. Duplex 2205 hot rolled sheet supports high cyclic stress so there is no fatigue failure. In some cases it can be used for -100 degrees Fahrenheit. It also supports thermoforming between 1100-1150 degrees Celsius.
0086-15311659629
Alice@bj-export.com
◉ Product Parameters
◉ Factory Display
◉ FAQ
◉ Product Recommendation

Product Parameters


2205 Stainless steel coil manufacturer

Duplex stainless steel 2205 alloy is a compound stainless steel composed of 22% chromium, 2.5% molybdenum and 4.5% nickel nitrogen alloy.
It has high strength, good impact toughness and good overall and local stress corrosion resistance.

2205 Stainless steel coil Price in China ,Manufacturer of 2205 Stainless Steel coil

The yield strength of 2205 duplex stainless steel is more than double that of ordinary austenitic stainless steel. This characteristic allows designers to reduce weight when designing products, giving this alloy a price advantage over 316,317L.
This alloy is particularly suitable for the temperature range of -50°F/+600°F.
For applications beyond this temperature range, this alloy may also be considered, but there are some limitations, especially when applied to welded structures.

Due to the chromium (22%), molybdenum (3%) and nitrogen (0.18%) content,2205 has better corrosion resistance than 316L and 317L in most environments.
Local corrosion resistance
The content of chromium, molybdenum and nitrogen in the 2205 duplex stainless steel makes it highly resistant to pitting and gap corrosion in oxidizing and acidic solutions.
Stress corrosion resistance
The two-phase microstructure of stainless steel is helpful to improve the stress corrosion cracking resistance of stainless steel.
Chloride stress corrosion occurs in austenitic stainless steels under certain temperature, tension, oxygen and chloride conditions.
As these conditions are not easily controlled, the use of 304L, 316L and 317L is limited in this regard.
Corrosion fatigue
The high strength and corrosion resistance of 2205 duplex steel make it have high corrosion fatigue strength.
The processing equipment is susceptible to corrosive environments and loading cycles, and the characteristics of 2205 are ideal for such applications.

Standard Specification Of 2205 coil

Thickness0.1mm-12mm
Width1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
LengthSince the custom
Surface2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
FinishHot rolled coil (HR), Cold rolled coil (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form Coils, Foils, Rolls, Plain coil, Shim coil, Perforated coil, Chequered coil, Strip, Flats,
Blank (Circle), Ring (Flange) etc.

2205 stainless steel composition content.

GradeA52:K53CMnSiPSCrMoNiN
2205Min.
Max.		≤0.03≤2.00≤1.00≤0.04≤0.0321.0~24.02.5~3.54.5~6.50.08~0.2

2205 Characteristic machining technology

1D — The surface has discontinuous granular shape, also known as fog surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2D – A slightly silvery white colour.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2B — Silver white with better gloss and flatness than a 2D surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling.
Ba – Excellent surface gloss, high reflectivity, like a mirror surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling.
No.3 — Good gloss, coarse grain surface.
Processing technology: polishing and tempering rolling for 2D or 2B with 100~120 abrasive materials (JIS R6002).
No.4 — Good gloss, fine lines on the surface.
Processing process: polishing and tempering rolling for 2D or 2B with 150~180 abrasive materials (JIS R6002).
HL — Silver grey with hair streaks.
Processing technology: 2D products or 2B products with appropriate granularity of abrasive materials for polishing the surface is a continuous abrasive grain.
MIRRO — Specular.
Processing technology: 2D products or 2B products with appropriate granularity of the grinding material grinding and polishing to the mirror effect.

Chemical Properties of Frequently-used Stainless Steel Material Grade

UNSASTMENJISC%Mn%P%S%Si%Cr%Ni%Mo%
S201002011.4372SUS201≤0.155.5-7.5≤0.06≤0.03≤1.0016.0-18.03.5-5.5-
S202002021.4373SUS202≤0.157.5-10.0≤0.06≤0.03≤1.0017.0-19.04.0-6.0-
S301003011.4319SUS301≤0.15≤2.00≤0.045≤0.03≤1.0016.0-18.06.0-8.0-
S304003041.4301SUS304≤0.08≤2.00≤0.045≤0.03≤0.7518.0-20.08.0-10.5-
S30403304L1.4306SUS304L≤0.03≤2.00≤0.045≤0.03≤0.7518.0-20.08.0-12.0-
S30908309S1.4833SUS309S≤0.08≤2.00≤0.045≤0.03≤0.7522.0-24.012.0-15.0-
S31008310S1.4845SUS310S≤0.08≤2.00≤0.045≤0.03≤1.5024.0-26.019.0-22.0-
S316003161.4401SUS316≤0.08≤2.00≤0.045≤0.03≤0.7516.0-18.010.0-14.02.0-3.0
S31603316L1.4404SUS316L≤0.03≤2.00≤0.045≤0.03≤0.7516.0-18.010.0-14.02.0-3.0
S31703317L1.4438SUS317L≤0.03≤2.00≤0.045≤0.03≤0.7518.0-20.011.0-15.03.0-4.0
S321003211.4541SUS321≤0.08≤2.00≤0.045≤0.03≤0.7517.0-19.09.0-12.0-
S347003471.4550SUS347≤0.08≤2.00≤0.045≤0.03≤0.7517.0-19.09.0-13.0-
S405004051.4002SUS405≤0.08≤1.00≤0.04≤0.03≤1.0011.5-14.5≤0.60-
S409004091.4512SUS409≤0.08≤1.00≤0.045≤0.03≤1.0010.5-11.75≤0.50-
S430004301.4016SUS430≤0.12≤1.00≤0.040≤0.03≤0.7516.0-18.0≤0.60-
S434004341.4113SUS434≤0.12≤1.00≤0.040≤0.03≤1.0016.0-18.0--
S444004441.4521SUS444L≤0.025≤1.00≤0.045≤0.03≤1.0017.5-19.5≤1.00-
S40300403-SUS403≤0.155.5-7.5≤0.04≤0.03≤0.5011.5-13.0≤0.60-
S4100004101.40006SUS410≤0.15≤1.00≤0.035≤0.03≤1.0011.5-13.5≤0.60≤1.00
S420004201.4021SUS420J10.16~0.25≤1.00≤0.04≤0.03≤1.0012.0-14.0≤0.75≤1.00
S440A440A1.4028SUS440A0.60~0.75≤1.00≤0.04≤0.03≤1.0016.0-18.0-≤0.75
S32750SAD25071.4410
≤0.03≤1.2≤0.035≤0.02≤0.8024.0-26.06.0-8.03.0-5.0
S31803SAF22051.4462
≤0.03≤2.0≤0.03≤0.02≤1.0021.0-23.04.0-6.52.5-3.5
N08904904L1.4539
≤0.0.3≤2.0≤0.035≤0.03≤1.0018.0-20.023.0-25.03.0-4.0
Stainless steel coil inventory packaging


20230307102549723.jpg20230307102548977.jpg
20230307102547394.jpg20230307102547899.jpg



Factory Display

  • 645f88ceb28016b71deb44d0eca6ae91346ff4f633046-YV9trp.jpg
  • 4ba06389467ca90624596b987abe434be8635cba188343-TdLEpR 拷贝.jpg
  • 8.jpg
  • 1.jpg
  • 12.jpg
  • 工厂 (2).png
  • 工厂 (2).jpeg
  • 工厂车间 (1).jpeg
  • 工厂车间 (12).jpeg

FAQ

Q: Are you trading company or manufacturer ?

A: We are professional manufacturer with 20 years' experience, and our company also is a very professional a trade company for steel products.We can also provide a wide range of steel products.

Q: Will you delivery the goods on time?

A: Yes,we promise to deliver on time,indemnity clause in contract terms will work if we couldn't.

Q: Do you provide samples ? Is it free or extra ?

A: The samples are free,you just need to pay the courier freight.

Q: How could you guarantee your products?

A: Products are manufactured by certified workshops, inspected by professional inspector.

Q: Do you accept the third party inspection?

A: Yes, absolutely we accept.

Q: How do we trust your company?

A: We specialist in steel business for many years, authenticated by SGS,welcome to visit our factory.

Q: What's your advantages?

A: Our own production lines make the good prices and high quality possible and seasoned workers serve you 7*24 hours.

Q: Can you produce the products according to my own drawings?

A:Yes,we can produce the products according to your drawings that will be most satisfy you.

Q: What is your Payment?

A: 100% T/T advance , Western Union (For Small Order)
B: 30% T/T and balance 70% before the shipment
C: 100% Irrevocable LC at sight (For Big Order)

Q: How long is the Delivery time?

A: 7~20 working days after confirming the payment.
If the order is urgently, we will push our workshop finish in advance.

Product Recommendation